Sense[1]]|Sense2:Correction:fdoffset|Gain4[:Input Magnitude]? - Agilent Technologies EPM-P Series Programming Manual

[SENSe[1]]|SENSe2:CORRection:FDOFfset|GAIN4[:INPut][:MAGNitude]?
This command is used to return the frequency dependent offset currently
being applied.
Syntax
SENS
1
SENS2
Example
CORR:GAIN4?
Reset Condition
On reset, the frequency dependent offset is not affected.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
[SENSe[1]]|SENSe2:CORRection:FDOFfset|GAIN4[:INPut][:MAGNitude]?
:
:GAIN4
CORR
:FDOFfset
SENSe Subsystem
:INP
:MAG
This command queries the current
frequency dependent offset being
applied to channel A.
?
9-35