Agilent Technologies EPM-P Series Programming Manual page 327

MEMory Subsystem
MEMory:TABLe:FREQuency <numeric_value>{,<numeric_value>}
Syntax
MEM
Parameters
Item
numeric_value
1. The following measurement units can be used:
•Hz
•kHz (10
•MHz (10
•GHz (10
2. All frequencies are truncated to a multiple of 1 kHz.
Example
MEM:TABL:FREQ 200kHz,600kHz
Query
MEMory:TABLe:FREQuency?
The query returns a list of frequency points for the table currently
selected. The frequencies are returned in Hz.
Query Example
MEM:TABL:FREQ?
7-24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Space
:TABL :FREQ
Description/Default
A numeric value for the frequency. The
default units are Hz.
3
)
6
)
9
)
EPM-P Series Power Meters Programming Guide
,
numeric_value
?
Range of Values
1 kHz to
999.9 GHz
This command enters
frequencies of 200 kHz and
600 kHz into the currently
selected table.
This command queries the
frequency points in the currently
selected table.
1, 2