System:communicate:serial:transmit:auto? - Agilent Technologies EPM-P Series Programming Manual

SYSTem:COMMunicate:SERial:TRANsmit:AUTO?

This query always returns a 1 confirming that the transmitter parameter
settings for baud rate, word length, stop bits and parity are coupled to the
receiver values.
Syntax
Example
SYST:COMM:SER:TRAN:AUTO?
Agilent E4416A/E4417A Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SYSTem:COMMunicate:SERial:TRANsmit:AUTO?
SYST :COMM
:SER
SYSTem Subsystem
:TRAN
:AUTO ?
This command always returns a 1
to show that the transmitter and
receiver settings for baud rate,
word length, stop bits and parity
are the same.
11-17