Sense[1]]|Sense2:Correction:dcycle|Gain3 Commands - Agilent Technologies EPM-P Series Programming Manual

Power meters

Hide thumbs Also See for EPM-P Series:

Table of Contents

[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3 Commands

These commands control the pulse power measurement feature of the

power meter.

The following commands are detailed in this section:

[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3[:INPut]

[:MAGNitude] <numeric_value>

[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3:STATe <boolean>

You can use either DCYCLe or GAIN3 in these commands, both do the

same. Using GAIN3 complies with the SCPI standard whereas DCYCle

does not, but may make your program more understandable.

EPM-P Series Power Meters Programming Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3 Commands

SENSe Subsystem

Table of Contents