Display[:Window[1]|2][:State] <Boolean> - Agilent Technologies EPM-P Series Programming Manual

DISPlay Subsystem
DISPlay[:WINDow[1]|2][:STATe] <boolean>
DISPlay[:WINDow[1]|2][:STATe] <boolean>
This command enables/disables the upper or lower window (WINDow1 and
WINDow2 respectively) so that the display shows a single window only. The
displayed window is presented in expanded format, showing a single
measurement only: either the single measurement that was shown on the
window, or the currently selected measurement, if two measurements had
been shown.
Syntax
DISP
Examples
DISP:WIND2:STAT OFF
DISP:WIND2:STAT 1
Reset Condition
On reset, both windows are enabled.
Query
DISPlay[:WINDow[1]|2]:STATe?
The query enters a 1 or 0 into the output buffer indicating the state of the
selected window.
5-24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1 :STAT
:WIND
2
This command disables the lower
window. The upper window in
shown in expanded format,
displaying its currently selected
measurement.
This command enables the lower
window so that a dual window
display is once more provided.
EPM-P Series Power Meters Programming Guide
Space
0|OFF
1|ON
?