Agilent Technologies EPM-P Series Programming Manual page 549

Query
TRIGger[1]|2[:SEQuence[1]|2]:COUNt?
The query returns the current setting of trigger events for a specified
channel.
Query Example
TRIG:SEQ2:COUN?
Error Messages
If COUNt >1 when [SENSe[1]]|SENSe2:MRATe <character_data> is
set to NORMal or DOUBle, Error -221, "Settings Conflict" occurs.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
TRIGger[:SEQuence[1]|2]:COUNt <numeric_value>
This command queries the number
of triggered events for the channel
B measurement cycle.
TRIGger Subsystem
13-33