Agilent Technologies EPM-P Series Programming Manual page 194

READ[1]|2|3|4[:SCALar][:POWer:AC]:DIFFerence? [<expected_value>[,<resolution>[,<source list>]]]
Error Messages
• INITiate:CONTinuous must be set to OFF on both channels, otherwise
error -213, "INIT ignored" occurs.
• If TRIGger:SOURce is set to BUS or HOLD on either channel, error -214,
"Trigger deadlock" occurs.
• If the resolution parameter is not the same as the current resolution
setting on the specified window, error -221, "Settings conflict" occurs.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Measurement Commands
2-47