Using Device Clear To Halt Measurements - Agilent Technologies EPM-P Series Programming Manual

Power meters

Hide thumbs Also See for EPM-P Series:

Table of Contents

Power Meter Remote Operation

Using Device Clear to Halt Measurements

Device clear is an IEEE-488 low-level bus message which can be used to

halt measurements in progress. Different programming languages and

IEEE-488 interface cards provide access to this capability through their

own unique commands. The status registers, the error queue, and all

configuration states are left unchanged when a device clear message is

received. Device clear performs the following actions.

• All measurements in progress are aborted.

• The power meter returns to the trigger "idle state".

• The power meter's input and output buffers are cleared.

• The power meter is prepared to accept a new command string.

EPM-P Series Power Meters Programming Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents