Trigger Subsystem - Agilent Technologies EPM-P Series Programming Manual

TRIGger Subsystem

TRIGger Subsystem
TRIGger Subsystem
The TRIGger subsystem is used to synchronize device actions with events.
It includes the ABORt, INITiate and TRIGger commands. These are all
at the root level in the command hierarchy but they are grouped here
because of their close functional relationship.
Keyword
ABORt[1]|2
INITiate[1]|2
:CONTinuous
[:IMMediate]
INITiate
:CONTinuous
:ALL
:SEQuence[1]|2
[:IMMediate]
:ALL
:SEQuence[1]|2
TRIGger[1]|2
:DELay
:AUTO
[:IMMediate]
:SOURce
TRIGger
[:SEQuence]
:DELay
:HOLDoff
:HYSTeresis
:LEVel
:SLOPe
[:SEQuence[1]|2]
:COUNt
:DELay
:IMMediate
:SOURce
Many of the above commands contain a numeric which represents a
channel number. For example TRIGger1 and TRIGger2 represent
channel A and channel B respectively. Channel B commands cannot be
used with the single channel 4416A power meter and result in the error
"Header suffix out of range."
13-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Parameter Form
<boolean>
<boolean>
<boolean>
<boolean>
BUS|EXTernal|HOLD|IMMediate
|INTernal[[1]|2]
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
:AUTO <boolean>
<character_data>
<numeric_value>
:AUTO <boolean>
BUS|EXTernal|HOLD|IMMediate
|INTernal[[1]|2]
EPM-P Series Power Meters Programming Guide
Notes Page
[no query] page 13-3
[non-SCPI]
page 13-5
[no query] page 13-7
page 13-8
page 13-10
[no query] page 13-12
[no query] page 13-13
page 13-15
[no query] page 13-17
page 13-18
page 13-18
page 13-22
page 13-24
page 13-26
page 13-28
page 13-30
page 13-32
page 13-34
[no query] page 13-36
page 13-37