Agilent Technologies EPM-P Series Programming Manual page 247

CALCulate Subsystem
CALCulate[1]|2|3|4:RELative[:MAGNitude]:AUTO <boolean>|ONCE
Query
CALCulate[1]|2|3|4:RELative[:MAGNitude]:AUTO?
The query always returns OFF.
Error Message
• If CALCulate:RELative[:MAGNitude]:AUTO is set to ONCE while
SENSe:SPEed is set to 200, error -221, "Settings Conflict" occurs.
• If the value is set to ON error -224, "Illegal parameter value" occurs.
3-32
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
EPM-P Series Power Meters Programming Guide