Service:sensor[1]|2:Type? - Agilent Technologies EPM-P Series Programming Manual

SERVice:SENSor[1]|2:TYPE?

This query identifies the sensor type connected to the power meter input
channel(s). For Agilent 8480 Series sensors, either "A", "B", "D", or "H" is
returned. For E-Series and N8480 Series sensors, the model number
stored in EEPROM is returned
Syntax
SERV
Example
SERV:SENS2:TYPE?
Error Messages
• If no sensor is connected, error -241, "Hardware missing" occurs.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:SENS 1
:TYPE
2
SERVice Subsystem
SERVice:SENSor[1]|2:TYPE?
?
This query returns either, "A", "B",
"D", or "H" if an Agilent 8480
Series sensor is connected to
channel B, or the sensor model
number if an E-Series or N8480
Series sensor is connected to
channel B.
15-27