Memory:clear:table - Agilent Technologies EPM-P Series Programming Manual

MEMory Subsystem

MEMory:CLEar:TABle

MEMory:CLEar:TABle
This command is used to clear the contents of the table currently selected
using MEMory:TABLe:SELect. Although the table remains, a
MEMory:TABLe:FREQuency|GAIN:POINts? query returns a 0 as there
are no contents in the table.
This command is an alternative form of the MEMory:CLEar[:NAME]
command, the only difference being the method in which the table is
selected.
Note The contents cleared using this command are non-recoverable.
Syntax
MEM
Example
MEM:CLE:TABL
Error Message
If no table is selected, error -221, "Settings conflict" occurs.
7-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:CLE :TABL
This command clears the contents
of the currently selected table.
EPM-P Series Power Meters Programming Guide