Sense[1]]|Sense2:Correction:gain2[:Input Magnitude] <Numeric_Value> - Agilent Technologies EPM-P Series Programming Manual

[SENSe[1]]|SENSe2:CORRection:GAIN2[:INPut][:MAGNitude] <numeric_value>
[SENSe[1]]|SENSe2:CORRection:GAIN2[:INPut][:MAGNitude] <numeric_value>
This command is used to enter a channel offset value for the power meter
setup, for example cable loss. The power meter then corrects every
measurement by this factor to compensate for the gain/loss.
Entering a value for GAIN2 using this command automatically turns the
[SENSe[1]]|SENSe2:CORRection:GAIN2:STATe command to ON.
Syntax
SENS
1
SENS2
Parameters
Item
numeric_value
Example
CORR:GAIN2 50
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
CORR :GAIN2
Description/Default
A numeric value:
• DEF: the default is 0.00 dB.
• MIN: -100 dB.
• MAX: +100 dB.
SENSe Subsystem
:INP
:MAGN
Space numeric_value
DEF
MIN
MAX
Space
? MIN
MAX
Range of Values
-100 to +100 dB
DEF
MIN
MAX
This command sets a channel
offset of 50 dB for channel A.
9-39