Memory:table:select <Character_Data> - Agilent Technologies EPM-P Series Programming Manual

MEMory:TABLe:SELect <character_data>
This command is used to activate either a sensor calibration table (8480
Series power sensors and N8480 Series sensors with Option CFT only), or
a frequency dependent offset table. A table must be activated before any
operation can be performed on it.
Syntax
MEM
Parameters
Item
character_data
Example
MEM:TABL:SEL "Sensor1"
Query
MEMory:TABLe:SELect?
The query returns the name of the currently selected table.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MEMory:TABLe:SELect <character_data>
Space
:TABL :SEL
Description/Default
Details the table name. A maximum of
12 characters can be used.
MEMory Subsystem
character_data
?
Range of Values
A to Z (uppercase)
a to z (lowercase)
0 - 9
_ (underscore)
This command selects a sensor
calibration table named
"Sensor1".
7-31