Status:questionable - Agilent Technologies EPM-P Series Programming Manual

STATus Subsystem

STATus:QUEStionable

STATus:QUEStionable
The questionable register set contains bits which give an indication of the
quality of various aspects of signals processed by the power meter as a
whole.
The following bits in these registers are used by the power meter:
Bit
Number
0 to 2
3
4 to 7
8
9
10 to 15
Bit 3 is set by the logical OR outputs of the
STATus:QUEStionable:POWer:SUMMary register set.
Bit 8 is set by the logical OR outputs of the
STATus:QUEStionable:CALibration:SUMMary register set.
Bit 9 is set if power-on self-test fails, and cleared if it passes.
Syntax
STAT
10-20
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Decimal
Definition
Weight
- Not used
8 POWer Summary
- Not used
256 CALibration Summary
512 Power On Self Test
- Not Used (bit 15 always 0)
:QUES
EPM-P Series Power Meters Programming Guide