Memory:table:gain[:Magnitude]:Points? - Agilent Technologies EPM-P Series Programming Manual

MEMory:TABLe:GAIN[:MAGNitude]:POINts?

This query is used to return the number of calibration factor/offset points
for the currently selected table. If the currently selected table is a sensor
calibration table (8480 Series power sensors and N8480 Series sensors
with Option CFT only), the reference calibration factor will be included
If no values have been set, 0 is returned. If no table is selected, NAN is
returned.
Syntax
MEM
Example
MEM:TABL:GAIN:POIN?
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MEMory:TABLe:GAIN[:MAGNitude]:POINts?
:TABL :GAIN :MAGN
MEMory Subsystem
?
:POIN
This command queries the number
of calibration factor/offset points
in the current table.
7-29