Agilent Technologies EPM-P Series Programming Manual page 522

TRIGger Subsystem
INITiate[1]|2:CONTinuous <boolean>
INT[[1]|2] or EXT, INITiate:CONTinuous is not changed. For other
trigger sources, INITiate:CONTinuous is set to ON.
Query
INITiate[1]|2:CONTinuous?
The query enters a 1 or 0 into the output buffer.
•
•
Query Example
INIT2:CONT?
13-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1 is returned when there is continuous triggering.
0 is returned when there is only a single trigger.
EPM-P Series Power Meters Programming Guide
This command queries whether
channel B is set for single or
continuous triggering.