Agilent Technologies EPM-P Series Programming Manual page 560

UNIT Subsystem
UNIT[1]|2|3|4:POWer:RATio <ratio_unit>
UNIT[1]|2|3|4:POWer:RATio <ratio_unit>
This command sets the window/measurement ratio units.
•
•
•
•
Syntax
UNIT
Parameters
Item
ratio_unit
Example
UNIT1:POW:RAT DB
Reset Condition
On reset, the value is set to DB.
14-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
UNIT1:POWer:RATio sets the ratio measurement units for the
upper window/upper measurement.
UNIT2:POWer:RATio sets the ratio measurement units for the
lower window/upper measurement.
UNIT3:POWer:RATio sets the ratio measurement units for the
upper window/lower measurement.
UNIT4:POWer:RATio sets the ratio measurement units for the
lower window/lower measurement.
:POW :RAT
1
2
3
4
Description/Default
The ratio measurement unit.
The default unit is DB.
EPM-P Series Power Meters Programming Guide
Space ratio_unit
?
Range of Values
DB
PCT
This command sets the ratio
measurement units for the upper
window/upper measurement.