Service:sensor[1]|2:Power:usable:minimum? - Agilent Technologies EPM-P Series Programming Manual

SERVice:SENSor[1]|2:POWer:USABle:MINimum?

This query returns the minimum power that can be accurately measured
by the currently connected sensor. It is applicable to E-Series sensors only.
Maximum power information is stored in the sensor's EEPROM.
Syntax
SERV
Example
SERV:SENS:POW:USAB:MIN?
Error Messages
• If no sensor is connected, error -241, "Hardware missing" occurs.
• If a non E-Series is connected, error -241 "Hardware missing" occurs.
• If the E-Series sensor currently connected does not contain the
necessary information in EEPROM, error -241 "Hardware missing"
occurs.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SERVice:SENSor[1]|2:POWer:USABle:MINimum?
:POW
:SENS
1
2
SERVice Subsystem
:USAB
:MIN
This query returns the minimum
power that can be accurately
measured by the E-Series sensor
currently connected to channel A.
?
15-23