Agilent Technologies EPM-P Series Programming Manual page 296

Parameters
Item
numeric_value
Example
DISP:WIND2:TRAC:UPP 100
Reset Condition
On reset, the value is set to 20 dBm.
Query
DISPlay:[WINDow[1]|2]:TRACe:UPPer [MIN|MAX]
The query returns the current setting of the trace window upper scale
limit or the value associated with MIN or MAX. The format of the response
is <NR3>.
Query Example
DISP:WIND2:TRAC:UPP?
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DISPlay[:WINDow[1]|2]:TRACe:UPPer <numeric_value>
Description/Default
A numeric value for the trace window
upper scale limit.
• DEF: the default is 20 dBm
• MIN: -150 dBm
• MAX: 230 dBm
Units used are resolved to 1 dBm
This command sets the trace
window upper scale limit to
100 dBm
This command queries the trace
window upper scale limit of the
lower window
DISPlay Subsystem
Range of Values
to dBm
-150 230
DEF
MIN
MAX
5-31