Display[:Window[1]|2]:Trace:feed <Character_Data> - Agilent Technologies EPM-P Series Programming Manual

DISPlay Subsystem
DISPlay[:WINDow[1]|2]:TRACe:FEED <character_data>
DISPlay[:WINDow[1]|2]:TRACe:FEED <character_data>
This command selects which channel's trace is displayed in the specified
window.
Syntax
DISP
:WIND
Parameters
Item
character_data
Example
DISP:WIND2:TRAC:FEED SENS1
Reset Condition
On reset, the value is set to:
• Upper window: SENS1.
• Lower window (dual channel only): SENS2.
5-26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:TRAC :FEED
1
2
Description/Default
Identifies which channel's trace is
displayed.
• SENS1: channel A.
• SENS2: channel B.
EPM-P Series Power Meters Programming Guide
Space
character_data
Range of Values
SENS1
SENS2
This command selects channel A's
trace to be displayed in the lower
window.