Agilent Technologies EPM-P Series Programming Manual page 255

CALibration Subsystem
CALibration[1]|2[:ALL]?
Query Example
CAL1:ALL?
Error Messages
• If the calibration was not carried out successfully the error -231, "Data
Questionable; CAL ERROR" occurs. If you are using the E4417A the
error message specifies which channel the calibration failed on.
• If zeroing was not carried out successfully the error -231, "Data
Questionable; ZERO ERROR" occurs. If you are using the E4417A the
error message specifies which channel the calibration failed on.
• If there is no sensor connected, the error -241, "Hardware Missing"
occurs.
4-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This command causes the power
meter to perform a calibration
sequence on channel A and return
a result.
EPM-P Series Power Meters Programming Guide