Agilent Technologies EPM-P Series Programming Manual page 265

CALibration Subsystem
CALibration[1]|2:ZERO:NORMal:AUTO <boolean>
• If this command is set to ON the error -224, "Illegal parameter value"
occurs.
• If there is no sensor connected or if a non-E9320 sensor is connected,
the error -241, "Hardware missing" occurs.
• If an E9320 sensor is connected and is not in NORMAL mode, the error
-221 "Settings conflict" occurs.
4-16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
EPM-P Series Power Meters Programming Guide