Service:sensor[1]|2:Cplace? - Agilent Technologies EPM-P Series Programming Manual

SERVice Subsystem

SERVice:SENSor[1]|2:CPLace?

SERVice:SENSor[1]|2:CPLace?
This query returns the calibration place in E-Series and N8480 Series
sensors. Calibration place information is stored in the sensor's EEPROM.
Syntax
SERV
Example
SERV:SENS2:CPL?
Error Messages
• If no power sensor is connected, error -241 "Hardware missing" occurs.
• If a non E-Series or N8480 Series sensor is connected, error -241
"Hardware missing" occurs.
15-16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:SENS 1
:CPL
2
EPM-P Series Power Meters Programming Guide
?
This query returns the place of
calibration of the E-Series or
N8480 Series sensor connected to
channel B.