Agilent Technologies EPM-P Series Programming Manual page 409

Power meters

Hide thumbs Also See for EPM-P Series:

Table of Contents

SENSe Subsystem

[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:TIME <numeric_value>

Query Example

SENS2:SWE2:TIME?

Error Messages

• If the command is used when a non E9320 sensor is connected, the

error -241, "Hardware missing" occurs.

• If the command is used when an E9320 sensor is connected and set to

AVERage mode rather than NORMal mode, the error -221, "Settings

Conflict" occurs.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

This command queries the length

of the time-gated period for

channel B and gate 2.

EPM-P Series Power Meters Programming Guide

Chapters

Table of Contents