Trace[1]|2:Unit <Character_Data> - Agilent Technologies EPM-P Series Programming Manual

TRACe Subsystem
TRACe[1]|2:UNIT <character_data>
TRACe[1]|2:UNIT <character_data>
This command sets the units for the trace for the specified channel
Note This command is included for compatibility purposes only. It has the
same purpose as
[SENSe[1]]|SENSe2:TRACe:UNIT <character_data>
which should be used in preference.
Syntax
TRAC
Parameters
Item
character_data
Example
TRAC2:UNIT W
Reset Condition
On reset the units are set to dBm.
Query
TRACe[1]|2:UNIT?
The query command returns the current value of character_data.
12-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1 Space
:UNIT
2
?
Description/Default
• DBM: dBm.
• W: Watts.
This command sets the trace units
for channel B Watts.
EPM-P Series Power Meters Programming Guide
character_data
Range of Values
DBM
W