Agilent Technologies EPM-P Series Programming Manual page 224

Query
CALCulate[1]|2|3|4:GAIN[:MAGNitude]? [MIN|MAX]
The query returns the current setting of the display offset or the value
associated with MIN and MAX.
Query Example
CALC1:GAIN?
Error Message
If CALCulate[1]|2|3|4:GAIN[:MAGNitude] is set to ON while
SENSe:SPEed is set to 200, error -221, "Settings Conflict" occurs.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CALCulate[1]|2|3|4:GAIN[:MAGNitude] <numeric_value>
This command queries the current
setting of the display offset on the
upper window/upper
measurement.
CALCulate Subsystem
3-9