Agilent Technologies EPM-P Series Programming Manual page 444

Bit 5 is set when the following condition occurs:
•
Bis 6 is set when the following condition occurs (E4417A only):
•
These bits are cleared when no errors or events are detected by the power
meter during a measurement covering the causes given for it to set.
Syntax
STAT
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Channel A requires zeroing
Channel B requires zeroing
:QUES :POW
STATus Subsystem
STATus:QUEStionable:POWer[:SUMMary]
:SUMM
10-23