Trace[1]|2[:Data]? <Character_Data> - Agilent Technologies EPM-P Series Programming Manual

TRACe[1]|2[:DATA]? <character_data>
This query returns trace data from the specified channel. The trace
resolution is determined by <character_data>.
Note This command cannot be used over RS232 or RS422 serial
interfaces.
Data is returned in IEEE 488.2 arbitrary block program data format as
follows:
#xyyy..yddd................ddd<LF>
Example: if there are 12435 data bytes, y = 12435 and x = 5
Each point in the trace is represented as an IEEE 754 32 bit floating point
number, made up of four bytes in the data block. The MS byte is
transmitted first. Each complete block is terminated by a line feed.
TRACe data formatting is not affected by FORMat subsystem
Note
formatting.
Syntax
TRAC
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The number of data bytes (d)
contained in the block.
The number of y digits
Signifies the start of the block
1 ?
:DATA
2
TRACe Subsystem
TRACe[1]|2[:DATA]? <character_data>
Line feed character
signifies the end of the block
Data bytes
Space
character_data
12-3