Initiate:continuous:all <Boolean> - Agilent Technologies EPM-P Series Programming Manual

TRIGger Subsystem
INITiate:CONTinuous:ALL <boolean>
INITiate:CONTinuous:ALL <boolean>
Sets all trigger sequences to be continuously initiated.
If INITiate:CONTinuous:ALL is set to:
•
•
Syntax
INIT
Example
INIT:CONT:ALL ON
Reset Condition
On reset (*RST), this command is set to OFF.
On preset (SYSTem:PRESet) and instrument power-up, when entering
local mode, if TRIGger[:SEQuence[1]|2]:SOURce is set to
INT[[1]|2] or EXT, INITiate:CONTinuous is not changed. For other
trigger sources, INITiate:CONTinuous is set to ON.
Query
INITiate:CONTinuous:ALL?
The query enters a 1 or 0 into the output buffer.
•
•
13-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ON, trigger sequences are set to be continuously initiated.
OFF, trigger sequences are not set to be continuously initiated.
:CONT
:ALL
1 is returned when trigger sequences are set to be continuously
initiated.
0 is returned when trigger sequences are not set to be
continuously initiated.
EPM-P Series Power Meters Programming Guide
Space
0|OFF
1|ON
?
This command sets all trigger
sequences to be continuously
initiated.