Agilent Technologies EPM-P Series Programming Manual page 381

SENSe Subsystem
[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2:STATe <boolean>
Query Example
SENS2:CORR:CSET1:STAT?
Error Messages
If you attempt to set this command to ON and no table has been selected
using [SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2:[SELect]
then error -221, "Settings conflict" occurs and
[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2:STATe
remains OFF.
9-28
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This command queries whether
there is currently an active sensor
calibration table for channel B.
EPM-P Series Power Meters Programming Guide