Sense[1]]|Sense2:Sweep[1]|2|3|4:Offset:time Numeric_Value> - Agilent Technologies EPM-P Series Programming Manual

[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:OFFSet:TIME <numeric_value>
This command sets the delay between the delayed trigger point and the
start of the time-gated period (the offset time) for E9320 sensors which are
set to NORMal mode. To set an E9320 sensor to NORMal mode, refer to the
command [SENSe[1]]|SENSe2:DETector:FUNCtion
<character_data>
on page 9-41.
Syntax
SENS
1
SENS2
Parameters
Item
numeric_value
Example
SENS2:SWE3:OFFS:TIME 1.001
Reset Condition
On reset, the value is set to 0 seconds.
Query
SENSe[1]]|SENSe2:SWEep[1]|2|3|4:OFFSet:TIME?
The query returns the current delay between the trigger point and the
start of the time-gated period.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:OFFSet:TIME <numeric_value>
:OFFS
: SWE
1
2
3
4
Description/Default
The delay between the trigger point and
the start of the time-gated period.
• DEF: the default value is 0 seconds.
Units are resolved to 1 ns.
SENSe Subsystem
Space
:TIME numeric_value
DEF
?
Range of Values
-1 to 1 seconds
DEF
This command sets the delay to
1.001 seconds.
9-53