Measurement Units; Display[:Window[1]|2]:Trace:upper <Numeric_Value> - Agilent Technologies EPM-P Series Programming Manual

DISPlay Subsystem
DISPlay[:WINDow[1]|2]:TRACe:UPPer <numeric_value>
DISPlay[:WINDow[1]|2]:TRACe:UPPer <numeric_value>
This command sets the trace window upper scale limit.
Note This command is included for compatibility purposes only. It has the
same purpose as
SENSe[1]|2:TRACe:LIMit:UPPer <numeric_value>
which should be used in preference.
The units used are dependent on the current setting of SENS:TRAC:UNIT
as shown in the following table:
SENS:TRAC:UNIT
Syntax
DISP :WIND
5-30
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 5-6: Measurement Units
Units:
Units:
DISPlay[:WINDow[1]
|2]:TRACe:UPPer
dBm dBm
W
:TRAC
1 :UPP
2
EPM-P Series Power Meters Programming Guide
W
Space
numeric_value
DEF
MIN
MAX
Space
?
MIN
MAX