Measurement Units; Display[:Window[1]|2]:Analog:lower <Numeric_Value> - Agilent Technologies EPM-P Series Programming Manual

DISPlay Subsystem
DISPlay[:WINDow[1]|2]:ANALog:LOWer <numeric_value>
DISPlay[:WINDow[1]|2]:ANALog:LOWer <numeric_value>
This command sets the analog meter lower scale limit.
Note This command has the same purpose as
DISPlay[:WINDow[1]|2]:METer:LOWer <numeric_value>
The units used are dependent on the current setting of UNIT:POWer and
CALCulate:RELative:STATe as shown in the following table:
Measurement
Mode
Avg, Pk
Single Channel
Pk-Avg
Ratio Avg, Pk, Pk-Avg
Avg, Pk
Difference
Pk-Avg
Syntax
DISP :WIND
5-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 5-1: Measurement Units
CALC:REL:STAT OFF
Measurement
Type
Linear
Watt
%
%
Watt
%
1 :ANAL
2
CALC:REL:STAT ON
Log Linear
dBm %
dB %
dB %
dBm %
dB %
Space
numeric_value
:LOW
DEF
MIN
MAX
Space
?
EPM-P Series Power Meters Programming Guide
Log
dB
dB
dB
dB
dB
MIN
MAX