Display:contrast <Numeric_Value> - Agilent Technologies EPM-P Series Programming Manual

DISPlay:CONTrast <numeric_value>
This command controls the display contrast:
• A contrast of 0 represents a minimum contrast.
• A contrast of 1 represents a maximum contrast.
When the supply power is cycled off then on the contrast sets to the
factory default for that particular power meter.
Syntax
DISP
Parameters
Item
numeric_value
Example
DISP:CONT 0.75
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Space numeric_value
:CONT
DEF
MIN
MAX
Space
?
Description/Default
A numeric value for the contrast level.
• DEF: the factory default value
which can vary between power
meters.
• MIN: 0.
• MAX: 1.
Units are resolved to 0.01.
DISPlay Subsystem
DISPlay:CONTrast <numeric_value>
MIN
MAX
Range of Values
to
0 1
DEF
MIN
MAX
This command sets the display
contrast to 0.75.
5-3