Sense[1]]|Sense2:Average Commands - Agilent Technologies EPM-P Series Programming Manual

SENSe Subsystem

[SENSe[1]]|SENSe2:AVERage Commands

[SENSe[1]]|SENSe2:AVERage Commands
These commands control averaging which is used to improve
measurement accuracy. They combine successive measurements to
produce a new composite result.
The following commands are detailed in this section:
[SENSe[1]]|SENSe2:AVERage:COUNt <numeric_value>
[SENSe[1]]|SENSe2:AVERage:COUNt:AUTO <boolean>
[SENSe[1]]|SENSe2:AVERage:SDETect <boolean>
[SENSe[1]]|SENSe2:AVERage[:STATe] <boolean>
EPM-P Series Power Meters Programming Guide 9-5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com