Measurement Units; Sense[1]|2:Trace:limit:upper <Numeric_Value> - Agilent Technologies EPM-P Series Programming Manual

SENSe Subsystem
SENSe[1]|2:TRACe:LIMit:UPPer <numeric_value>
SENSe[1]|2:TRACe:LIMit:UPPer <numeric_value>
This command sets the upper scale limit of the trace for the specified
channel.
The units used are dependent on the current setting of SENS:TRAC:UNIT
as shown in the following table:
SENS:TRAC:UNIT
Note The trace lower scale limit is maintained at a lower power than the
upper scale limit which is adjusted to be slightly greater than the
lower scale limit if necessary. Refer to
SENSe[1]|2:TRACe:LIMit:LOWer <numeric_value> for further
information on setting the trace lower scale limit.
Syntax
:SENS 1
2
9-60
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 9-2: Measurement Units
Units:
Units:
SENS:TRAC:LIM:UPP
dBm dBm
W
:TRAC :LIM :UPP
EPM-P Series Power Meters Programming Guide
W
Space
numeric_value
DEF
MIN
MAX
Space
? MIN
MAX