Agilent Technologies EPM-P Series Programming Manual page 373

SENSe Subsystem
[SENSe[1]]|SENSe2:BANDwidth|BWIDth:VIDeo <character_data>
Example
SENSe1:BAND:VID HIGH
Reset Condition
On reset, sensor bandwidth is set to MEDium.
Query
[SENSe[1]]|SENSe2:BANDwidth|BWIDth:VIDeo?
The query returns the current sensor bandwidth setting.
Query Example
SENS2:BAND:VID?
Error Messages
• If the command is used when a non E9320 sensor is connected, the
error -241, "Hardware missing" occurs.
• If the command is used when an E9320 sensor is connected and set to
AVERage mode rather than NORMal mode, the error -221, "Settings
Conflict" occurs.
9-20
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This command sets sensor
bandwidth to high for channel A.
This command queries the current
sensor bandwidth setting for
channel B.
EPM-P Series Power Meters Programming Guide