Agilent Technologies EPM-P Series Programming Manual page 427

STATus Subsystem
Status Register Set Commands
:NTRansition <NRf>|<non-decimal numeric>
This command sets the Negative Transition Register of the SCPI Register
Set you require to control. The parameter value, when rounded to an
integer and expressed in base 2 has it's first 15 bits written into the
Negative Transition Register of the SCPI Register Set concerned. The last
bit (bit 15) is always set to 0.
Syntax
Parameters
Type
NRf
non-decimal numeric
Query
:NTRansition?
The query returns a 15 bit decimal-weighted number representing the
contents of the Negative Transition Register of the SCPI register set being
queried. The format of the return is <NR1> in the range of 0 to 32767
15
(2 -1).
10-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
space NRf
:NTR
non-decimal numeric
?
Description
The value used to set the
NTR Register.
EPM-P Series Power Meters Programming Guide
Range of Values
16
0 to 2 -1