Agilent Technologies EPM-P Series Programming Manual page 262

Query
CALibration[1]|2:RCFactor? [MIN|MAX]
The query returns the current setting of the reference calibration factor or
the values associated with MIN and MAX.
Query Example
CAL2:RCF?
Error Messages
If this command is used when an E-Series power sensors or N8480 Series
power sensor (excluding Option CFT) is connected the error -241,
"Hardware missing" occurs.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CALibration Subsystem
CALibration[1]|2:RCFactor <numeric_value>
This command queries the
reference calibration factor of
channel B.
4-13