Agilent Technologies EPM-P Series Programming Manual page 248

CALCulate[1]|2|3|4:RELative:STATe <boolean>
This command enables/disables relative mode. If the command is:
•
•
Syntax
CALC
Example
CALC1:REL:STAT OFF
Reset Condition
On reset, relative mode is disabled.
Query
CALCulate[1]|2|3|4:RELative:STATe?
The query returns a 1 or 0 into the output buffer.
•
•
Query Example
CALC1:REL:STAT?
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CALCulate[1]|2|3|4:RELative:STATe <boolean>
disabled, the measurement signal remains unchanged.
enabled, the current relative value set by
CALCulate:RELative:MAGnitude:AUTO is applied to the
measurement signal.
:REL
1
2
3
4
1 is returned when relative mode is enabled.
0 is returned when relative mode is disabled.
CALCulate Subsystem
Space
:STAT 0|OFF
1|ON
?
This command disables the
relative mode on the upper
window/upper measurement.
This command queries whether
relative mode is off or on for the
upper window/upper
measurement.
3-33