Agilent Technologies EPM-P Series Programming Manual page 414

Parameters
Item
numeric_value
Example
SENS:TRAC:LIM:UPP 100
Reset Condition
On reset, the value is set to DEF.
Query
SENSe[1]|2:TRACe:LIMit:LOWer [MIN|MAX]
The query returns the current setting of the trace upper scale limit or the
value associated with MIN or MAX. The format of the response is <NR3>.
Query Example
SENS:TRAC:LIM:UPP?
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SENSe[1]|2:TRACe:LIMit:UPPer <numeric_value>
Description/Default
A numeric value for the trace upper
scale limit.
• DEF: the default is 20 dBm
• MIN: -150 dBm
• MAX: 230 dBm
Units used are resolved to 1 dBm
This command sets the trace upper
scale limit to 100 dBm for
channel A.
This command queries the trace
upper scale limit of channel A.
SENSe Subsystem
Range of Values
to dBm
-150 230
DEF
MIN
MAX
9-61