Trigger[:Sequence[1]|2]:Immediate - Agilent Technologies EPM-P Series Programming Manual

TRIGger Subsystem

TRIGger[:SEQuence[1]|2]:IMMediate

TRIGger[:SEQuence[1]|2]:IMMediate
This command provides a one time over-ride of the normal process of the
downward path through the wait for trigger state. It causes the immediate
exit of the event detection layer if the trigger system is in this layer when
the command is received. In other words, the instrument stops waiting for
a trigger and takes a measurement ignoring any delay set by
TRIG:DELay.
Syntax
Example
TRIG:SEQ:IMM
13-36
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
TRIG :SEQ
EPM-P Series Power Meters Programming Guide
1
:IMM
2
This command initiates a
measurement on channel A.