Output:trigger[:State] <Boolean> - Agilent Technologies EPM-P Series Programming Manual

OUTPut:TRIGger[:STATe] <boolean>
This command enables/disables the trigger output signal.
Syntax
OUTP
Example
OUTP:TRIG:STAT 1
Reset Condition
On reset, the trigger output signal is disabled.
Query
OUTPut:TRIGger[:STATe]?
The query command enters a 1 or 0 into the output buffer indicating
whether or not the trigger output signal is enabled/disabled.
•
•
Query Example
OUTP:TRIG:STAT?
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:TRIG :STAT
1 is returned when the trigger output signal is enabled.
0 is returned when the trigger output signal is disabled.
OUTput Subsystem
OUTPut:TRIGger[:STATe] <boolean>
Space
0|OFF
1|ON
?
This command enables the trigger
output signal.
This command queries the status
of the trigger output signal.
8-11