Agilent Technologies EPM-P Series Programming Manual page 428

:PTRansition <NRf>|<non-decimal numeric>
This command is used to set the Positive Transition Register of the SCPI
Register Set you require to control. The first 15 bits of the input
parameter are written into the Positive Transition Register of the SCPI
Register Set concerned. The last bit (bit 15) is always set to 0.
Syntax
Parameters
Type
NRf
non-decimal numeric
Query
:PTRansition?
The query returns a 15 bit decimal-weighted number representing the
contents of the Positive Transition Register of the SCPI register set being
queried. The format of the return is <NR1> in the range of 0 to 32767
15
(2 -1).
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
space
:PTR NRf
non-decimal numeric
?
Description
The value used to set the
PTR Register.
STATus Subsystem
Status Register Set Commands
Range of Values
16
0 to 2 -1
10-7