Sense[1]]|Sense2:Correction:gain2:State <Boolean> - Agilent Technologies EPM-P Series Programming Manual

[SENSe[1]]|SENSe2:CORRection:GAIN2:STATe <boolean>
This command is used to enable/disable a channel offset for the power
meter setup. The [SENSe[1]]|SENSe2:CORRection:GAIN2[:INPut]
[:MAGNitude] command is used to enter the loss/gain value.
Syntax
SENS
SENS2
Example
CORR:GAIN2:STAT ON
Reset Condition
On reset, channel offsets are disabled.
Query
[SENSe[1]]|SENSe2:CORRection:GAIN2:STATe?
The query enters 1 or 0 into the output buffer indicating the status of the
channel offsets.
•
•
Query Example
CORR:GAIN2:STAT?
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
[SENSe[1]]|SENSe2:CORRection:GAIN2:STATe <boolean>
: :GAIN2
1 CORR
1 is returned if a channel offset is enabled.
0 is returned if a channel offset is disabled.
SENSe Subsystem
:STAT Space
0|OFF
1|ON
?
This command enables a channel
offset on channel A.
This command queries whether or
not there is a channel offset
applied to channel A.
9-37