Display:enable <Boolean> - Agilent Technologies EPM-P Series Programming Manual

DISPlay:ENABle <boolean>
This command is used to enable and disable the display. At power-up the
display is always enabled.
Syntax
DISP
Example
DISP:ENAB 0
Reset Condition
On reset, the display is enabled.
Query
DISPlay:ENABle?
The query returns a 1 or 0 into the output buffer.
• 1 is returned when the display is enabled.
• 0 is returned when the display is disabled.
Query Example
DISP:ENAB?
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Space
0|OFF
:ENAB
1|ON
?
DISPlay Subsystem
DISPlay:ENABle <boolean>
This command disables the
display.
This command queries whether
the display is on or off.
5-5