Initiate[:Immediate]:All - Agilent Technologies EPM-P Series Programming Manual

TRIGger Subsystem

INITiate[:IMMediate]:ALL

INITiate[:IMMediate]:ALL
This command initiates all trigger sequences.
Syntax
INIT
Example
INIT:IMM:ALL
Error Messages
If the power meter is not in the idle state or INITiate:CONTinuous is
ON, error -213, "INIT ignored" occurs.
13-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:IMM :ALL
This command initiates all trigger
sequences.
EPM-P Series Power Meters Programming Guide