System:communicate:serial[:Receive]:Pace Xon None - Agilent Technologies EPM-P Series Programming Manual

SYSTem:COMMunicate:SERial[:RECeive]:PACE XON|NONE
This command enables (XON) and disables (NONE) an Xon/Xoff software
handshake for the receiver. When enabled, an Xon control character is
transmitted when the receiver is ready to accept data and an Xoff control
character is transmitted when the receiver is unable to receive further
data (not ready for data).
Syntax
SYST
Example
SYST:COMM:SER:REC:PACE XON
Reset Condition
On reset, pacing is unaffected.
Query
SYSTem:COMMunicate:SERial[:RECeive]:PACE?
The query returns XON if the handshake is enabled and NONE if the
handshake is disabled.
Query Example
SYST:COMM:SER:REC:PACE?
Agilent E4416A/E4417A Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SYSTem:COMMunicate:SERial[:RECeive]:PACE XON|NONE
:COMM :SER :REC
SYSTem Subsystem
Space
:PACE XON
NONE
?
This command enables the receiver
Xon/Xoff software handshake.
This command queries whether
the receiver Xon/Xoff software
handshake is enabled (XON) or
disabled (NONE).
11-13