Agilent Technologies EPM-P Series Programming Manual page 397

SENSe Subsystem
[SENSe[1]]|SENSe2:FREQuency[:CW|:FIXed] <numeric_value>
Example
FREQ 500kHz
Reset Condition
On reset, the frequency is set to 50 MHz (DEF).
Query
[SENSe[1]]|SENSe2:FREQuency[:CW|:FIXed]? [MIN|MAX]
The query returns the current frequency setting or the values associated
with MIN and MAX. The units in which the results are returned are Hz.
Query Example
SENS2:FREQ?
9-44
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This command enters a channel A
frequency of 500 kHz.
This command queries the
channel B frequency setting.
EPM-P Series Power Meters Programming Guide